The TA1001T is a single channel video launch amplifier which converts the unbalanced video signal output from a CCTV camera to a balanced signal, for transmission down cat5/6 unshielded twisted pair cable.
It has a 3 position range switch which increases the amplifier gain for different lengths of UTP cable.
When used in conjunction with the TA1001R UTP receiver it can transmit full motion colour video up to 1200 meters. Both are available as a pair TA1001TR.
BNC connector for video input and terminal block for UTP output. 12Vdc power adaptor included.
The TA1001R is a balanced/unbalanced video receiver amplifier which converts the balanced video signal on a cat5/6 UTP cable to an unbalanced video signal for transmission along a 75Ω coaxial cable.
The output gain of the TA1001R can be adjusted by two potentiometers to compensate for colour gain and for brightness. When used in conjunction with the TA1001T Video Launch Amplifier it can receive full motion colour video up to 1200 meters. Both are available as a pair TA1001TR.
BNC connector for video output and terminal block for UTP input. 12Vdc power adaptor included.
The TA4004R can receive colour video signals on 4 balanced channels (cat5/6 cable) and output them as 4 unbalanced colour video signals for connection to a monitor or DVR or Video Distribution Unit.
The TA4004R utilises the same circuitry as the TA1001R and each channel has individual adjustments for colour gain and brightness.
BNC connector for video output and terminal block for UTP input. 12Vdc power adaptor included.
The TA8008R can receive colour video signals on 8 balanced channels (cat5/6 cable) and output them as 8 unbalanced (coax cable) colour video signals for connection to a monitor or DVR or Video Distribution Unit.
The TA8008R utilises the same circuitry as the TA1001R and each channel has individual adjustments for colour gain and brightness.
BNC connector for video output and terminal block for UTP input. 12Vdc power adaptor included.
The TA1001DIL is designed for longer ranges. Typically it will operate up to 1000 meters when working of the TP1001LH passive transmitter and up to 1500 meters with the active transmitter TA1001T.
The TA1001DIL has two easy adjustments for colour gain and brightness.
The TA1001DIL also has built in ground loop isolation, transient protection and ground lifting.
BNC connector for video output and terminal block for UTP input and data. 12Vdc power adaptor included. TA1001DIL can also operate from a 24Vac supply.
The TA1001HML with built in adjustable balance, impedance and linear gain controls for extra common mode interference rejection. Typically it will operate up to 800 meters when working of the TP1001LH passive transmitter and up to 1200 meters with the active transmitter TA1001T.
High, Mid and Low frequency compensation adjustment allows control of colour, brightness and contrast for a cleaner sharper picture.
Built in surge protection.
BNC connector for video output and terminal screws for UTP input. 12Vdc power adaptor included.
VIDEO DISTRIBUTION HUB AMPLIFIERS (UNBALANCED OUTPUT ONLY)
The TA8016CD offers 8 channels of 1 in (Balanced) 2 out (unbalanced) video distribution. The incoming video signal on UTP can be adjusted for colour gain and brightness.
BNC connector for video output and terminal block for UTP input. 12Vdc power adaptor included.
The TA1632CD offers 16 channels of 1 in (Balanced) 2 out (unbalanced) video distribution. The incoming video signal on UTP can be adjusted for colour gain and brightness.
BNC connector for video output and terminal block for UTP input. 12Vdc power adaptor included.
Prices exclude VAT and carriage
The TA1616R can receive colour video signals on 16 balanced channels (cat5/6 cable) and output them as 16 unbalanced (coax cable) colour video signals for connection to a monitor or DVR or Video Distribution Unit.
The TA1616R utilises the same circuitry as the TA1001R. and each channel has individual adjustments for colour gain and brightness.
BNC connector for video output and terminal block for UTP input. 12Vdc power adaptor included.
TRANSMITTER /RECEIVER PAIR
The TA1001TR provides a TA1001T Transmitter and a TA1001R Receiver in a single package. Together, these amplifiers enable a colour video signal to be sent along a Cat5 UTP cable for a distance of up to 1200 meters.
12Vdc power adaptors for both units included.
£31.00
£36.00
£144.00
£304.00
£561.00
£66.00
£52.00
£77.00
£377.00
£690.00
OUT OF STOCK